Ezurio BISM2 Bedienungsanleitung PDF herunterladen

Application Note

AN0011

Upgrading the BISM to 7 bit firmware

Overview

The BISM2 Intelligent Serial Module can be converted to 7 bit RS-232 Operation by upgrading the

firmware. This application note explains the upgrade process.

1. Firmware Upgrade Process

EZURiO has released firmware that converts the BISM2 to 7 bit operation. Registered users can

download this from the secure web site at

www.blu2i.com.

To install the firmware, unzip the file. Place the BISM2 module on the developer’s kit motherboard

and connect this to a suitable serial port of your PC. Use a mains supply for the board during the

upgrade process to ensure that the power supply is not interrupted.

Use EZURiO Terminal to check that the baud rate is correctly set and that the module is

responding.

NOTE: The upgrade process may take several minutes, so it is advisable to set the baud rate to

the highest rate that the PC can support, and ensure that the module is set to the same rate using

ATS520.

Then start up the upgrade program - TdkSmUpgrade.exe.

Select the correct COM port, Baud rate, Parity and Bits and check that the correct firmware file is

displayed. Then hit OK.

APN_06011_1v0 Upgrading the EZURiO Bluetooth Module for 7 bit firmware.doc Page 1

1 2 3 4 5

Application Note AN0011 Upgrading the BISM to 7 bit firmware Overview The BISM2 Intelligent Serial Module can be converted to 7 bit RS-232 Oper

Click Proceed to continue. Note that ALL S registers will be reset to default values during the upgrade. However, they will be stored and you will

The upgrader will now check the device, before starting the full upgrade. Click “Click to continue upgrade”. The upgrade process may take severa

You can step through the S register values one by one. You also have the option to restore all or skip all. The latter which will accept the new d

If the screen does not respond with appropriate characters, check that the communications parameters have been set to the new default values, i.e.

Weitere Dokumente für Netzwerk-Switches Ezurio BISM2

Ezurio BISM2 Betriebsanweisung (33 Seiten)

Ezurio BISM2 Spezifikationen (34 Seiten)

Keine Kommentare